Catégorie : elastomeric roof coating

  • What is the best asphalt or metal roof? Roof Sealant

    What is the best asphalt or metal roof? Roof Sealant

    Several options are available to you!

    If you are in the market for a new roof, you are probably feeling a little overwhelmed by the many options available. Asphalt shingles are among the most popular roofing options, but there is another option that is gaining ground – metal roofing! So which one is best for your home? Here is an overview of the advantages and disadvantages of each material.

    Asphalt roofing

    One of the biggest advantages of asphalt shingle roofs is that they are inexpensive compared to other shingles, making them a great option for homeowners on a budget. Another advantage is that asphalt roofs are incredibly flexible in terms of styling. Asphalt shingles come in a variety of colors and configurations, such as laminate and three-legged, so you can be sure you’re getting a roof that complements the look of your home and enhances its curb appeal.

    Also, if you want your roof to be installed relatively quickly, asphalt shingles could be a great solution. These types of shingles are very light and easy to cut, making them easier to install compared to other types of roofing. Very little prep work is required and no special tools are required. Since they are easy to install, asphalt shingles are also easy to replace. In fact, you can have the shingles replaced one at a time as needed, instead of going for a complete roof replacement.

    Of course, there are downsides to shingled roofs. Some cheaper asphalt roofing styles can be prone to wind uplift and shingle loss, putting your roof at risk of leakage. Additionally, while their lightweight natures make them easy to install, it also contributes to their ability to crack easily, especially when exposed to extreme temperature fluctuations or extreme heat.

    However, although extreme heat can cause problems, asphalt shingles should be installed when temperatures are warmer. If installed during the winter, your asphalt shingles can be prone to damage. Finally, asphalt roofs generally do not last as long as other roofing materials due to their light weight.

    Metal roof

    The biggest draw to metal roofs is their longevity. A properly installed metal roof can last between 40 and 70 years and withstand inclement weather such as wind gusts of up to 225 km / h. And with anti-rust coatings, they won’t corrode or crack over time. Another advantage is that they are environmentally friendly since they are 100% recyclable. Metal roofs are also energy efficient because they reflect solar radiant heat rather than absorb it, which can lower energy bills. And if you’re worried that your roof might look like an unsightly big piece of metal, don’t worry! Today’s metal roofs are available in a range of vibrant colors that will enhance the curb appeal of your home.

    Of course, there are downsides to metal roofs. One of the main reasons some homeowners are reluctant to invest in metal roofing is that it is generally more expensive than other types of roofing. Additionally, although metal roofs are valued for their durability, they can be dented by hail, falling large branches, or airborne objects. The impact of debris can also contribute to another problem: noise! Although this problem can be avoided with good insulation.

    Which one should you get?

    If you don’t mind investing in a roof that will last for decades with minimal maintenance, a metal roof might be for you. On the other hand, if you are a budget homeowner who loves the style and versatility of shingles, go for asphalt shingle roofs. Whatever roofing material you prefer, make sure your roofing is in the hands of a trusted company.

  • Synthetic vs Felt Roofing Underlayment: Pros and Cons

    Synthetic vs Felt Roofing Underlayment: Pros and Cons

    The underlay

    When most people think of roofs, they usually think of shingles or metal roofs. But what some may not know is that there is another layer of protection directly on the roof terrace and under the roof covering that plays a vital role in protecting your home from damage. by humidity. This is called the roof underlayment.

    What is a roofing underlayment?

    The roof underlayment is what sits between the shingles and the roof sheathing, or roof deck, which is typically plywood or OSB. It is installed directly to the roof deck and provides a secondary layer of protection against the elements, including rain, snow and wind.

    Types of roofing underlayment

    There are two main types of roofing underlayments:

    Felt or synthetic?

    Each product has its pros and cons, and the type you choose may depend on your geographic location, roofing materials used, roof design, budget, and what your roofing contractor may suggest.

    • The felt underlay

    • The synthetic underlay

    nFelt roofing underlayment

    Felt roofing underlayment is the oldest underlayment on the market. It is created by saturating paper or fiberglass mat with asphalt.

    Felt roofing underlayment is generally available in two types: # 15 felt and # 30 felt. Compared to # 15 Felt, # 30 Felt is generally thicker, stronger, and may be less likely to tear during installation or weather events.

    Advantages

    The main advantage of using a felt roofing underlayment is its cost. Felt underlayment tends to cost less than synthetic underlayment, which is why it is often the go-to solution for budget-conscious homeowners.

    The inconvenients

    There are several disadvantages to using a felt underlay on your roof. A downside to traditional felt roofing underlayment is that it generally cannot be left exposed for more than a few hours. Material may dry out or leach oils from heat. This would impact the ability of the felt to protect against moisture.

    Other disadvantages of the felt underlayment include:

    • Prone to tear in high winds and during installation.
    • If exposed to moisture, the carpet can absorb water and wrinkle the felt, making it more difficult to lay the shingles flat. Therefore, shingles should be installed immediately after installing the felt underlayment to ensure optimum protection.
    • The felt underlay also weighs more, which can make it more difficult to install.
    • The felt underlay a slippery surface, which can sometimes make installation more difficult.
    • The weight also leads to less material per roll. This means more potential seams instead of just one piece.

    Synthetic roof underlayment

    For better water resistance and protection from the elements, many roofers choose the synthetic underlayment. These products are generally made from durable polymers, which provide increased strength and longevity. This type of underlayment is generally resistant to moisture and, when installed correctly, provides better weather protection than felt.

    Synthetic materials are not standardized, so different manufacturers may manufacture their products differently and therefore may have different levels of performance. Make sure you do your research and talk to a trusted contractor who can help you choose the right roofing materials to protect your home.

    Advantages

    There are four main advantages of installing synthetic roofing underlayment over felt. Compared to felt, the synthetic roof underlayment is:

    • Sustainable
    • Quick to install
    • Safe
    • Repels water

    The synthetic underlay has a sturdy and durable construction with extremely high tear resistance compared to felt.

    Synthetic roofing underlayment is extremely durable. It does not generally tear and is suitable for prolonged UV exposure and humidity in some cases, which is especially useful if there is a bit of time before your roof covering is installed.

    Synthetic underlayment also resists start-up traffic, which is important when your roofing contractor walks over its surface during installation.

    Synthetic roofing underlayment also tends to be:

    • Lighter! Up to four times lighter in some cases
    • Quick to install! Because there is more material per roll than felt (synthetic roofing underlayment is available in wider and longer rolls), it allows your roofers to climb fewer ladders, allowing them to save time and perhaps speed up the work. For example, a typical 2,700 square foot home may require three rolls of synthetic underlayment versus 14 rolls of No. 30 felt to cover the same area.
    • Sure ! The synthetic underlay is also advantageous for the safety of the workers – This underlay, has a variety of non-slip surfaces for better accessibility on foot. It is also generally well marked with overlap guides and indicators of where fasteners should be placed, which helps improve consistency and accuracy during installation.
    • Moisture resistant! Where felt products tend to absorb water, synthetic roofing underlayments are designed to repel water. This is important for homeowners concerned about moisture infiltration, especially if they plan to leave the underlayment exposed for an extended period of time.

    Because it’s made of plastic, synthetic underlayment is generally resistant to mold growth, a definite advantage over felt.

    The inconvenients

    Compared to felt, the main disadvantage of synthetic roofing underlayment is its cost. The initial investment in better quality roofing materials is much higher than felt, however, it could save you money in the long run!

    The right underlay for your roof

    Whether you are embarking on a roof repair project or building a new home, there are many factors to consider when it comes to what type of underlayment to use. Synthetic roofing underlayment has many advantages over felt and can be a worthwhile investment to protect your roof and home from the risk of water and moisture infiltration.

  • Three advantages of “going green” when it comes to roofing.

    Three advantages of “going green” when it comes to roofing.

    Roofing-Go green!

    Save the planet. Reduce, reuse, recycle. When you hear these phrases, you usually think of the surroundings. However, when it comes to building ecologically using greener building materials for roofs, families can not only benefit the environment, but can also increase the comfort of their homes, support the health of their families. their families and significantly reduce costs.

    Greening the environment and the roof?

    Across the country, we need to start making a difference to help our planet and the homes we live in. Here are three reasons why entrepreneurs should consider giving their clients a green option.

    Three advantages of “going green” when it comes to roofing.
    Three advantages of “going green” when it comes to roofing.

    Roofing – Environmental benefits

    Our environment can be deeply impacted by construction methods, materials and operations. Most often, this impact is negative. Shingles can clog landfills and adversely affect air and water quality; building materials such as aluminum, concrete and steel are responsible for excess CO2 emissions; and pollution of water, air and soil can accumulate due to the accumulation of wastes.

    Entrepreneurs must be responsible. When they build ecologically, they protect and enhance ecosystems and biodiversity. We can do this by using recyclable materials in our products, shingles and other components. Regarding installation, it is essential to read the manufacturers recommendations for each product installed.

    Sustainable manufacturing is CertainTeed

    One of the most valuable players in the sustainable manufacturing industry is CertainTeed. The company not only recycles the majority of internal waste created by manufacturing (90% is turned into asphalt material for road construction), but it is also continuously developing new products, systems and solutions to reduce the footprint. carbon and improve energy efficiency.

    Products such as their CoolStar® are designed with solar reflective surfaces to reduce CO2 emissions and energy consumption. Partnering with an eco-friendly manufacturer is essential to propel our communities and our world forward.

    Health benefits

    One of the biggest benefits of green building is the increased health benefits. A “green” roof will use environmentally friendly building materials that improve the air quality of homes, in addition to increasing thermal and acoustic quality. This means that utility systems will run less to maintain comfortable temperatures in the house.

    Overall, families will benefit from a higher level of comfort and health. While helping to protect the environment from further damage, homeowners will also improve the overall quality of life for their entire family.

    Economic benefits

    The economic profitability of a green roof is not always immediately noticeable, as many materials and installations of green materials cost more upfront. In the long run, however, homeowners can expect both to lower utility bills and to dramatically increase the value of their home when they do end up selling. Since most green building materials are of higher quality, they will last longer and provide more sustainable design, construction and operational practices.

    So, building green saves money in the long run, improves the overall health of everyone in a home, and of course helps the environment to heal.

  • Owner or contractor: who chooses the color of the roof?

    Owner or contractor: who chooses the color of the roof?

    Who chooses the color of the roof?

    After you research and bid on roofing contractors for your project, you need to choose the one you trust and feel most comfortable with. Your roofer (and his team) should treat you, your choices, and your home with respect.

    Traditionally, it seems that roofing has been an industry where the contractor has played a bigger role in helping to choose the style and color of shingles for their clients.

    • Does your tile installer choose the style and color of your tiles?
    • Does your painter choose your paint color?

    So even if your roofer is an expert in roofing and can suggest products and colors for it, choosing a color is your decision, even if you are inexperienced in it.

    Your contractor may have a lot of installation experience and may tend to recommend these “safe” color choices for you. Just because everyone puts on a specific color doesn’t mean it matches your home or your personality. If you want something different, you have to be confident and let your contractor know. You are, after all, the customer!

    Owner or contractor: who chooses the color of the <a href=
    roof? » width= »1000″ height= »616″ /> Owner or contractor: who chooses the color of the roof?

    Residential roofing vs Commercial roofing

    Here are some tips on what you can do to help with your color choice:

    • Look online and in magazines to find images that inspire you.
    • Put all of your likely choices on the table, and then from there, start eliminating the options. It is best to do this before involving your contractor.
    • Drive around your neighborhood to see exterior design palettes and roofing color choices that other people have made.

    This will help you eliminate styles and colors that you don’t like, and more importantly, decide which ones you like.

    You may have the chance to see the owner in the yard and ask questions. Otherwise, your contractor will be able to identify
    the product.

    Let your roofer know your favorite shingle styles and colors before you come to your home so they can bring you the right samples. An experienced contractor has done many installations and has a list of reference addresses that he can provide to you. This allows you to see your favorite colors on a real home, in its natural element.

    Use technology to « try out » different styles and colors of roofs.

    The key here is that yes, your contractor is a big factor in your project, but you have the final say on all decisions. Preparing on your part to identify (and potentially eliminate) options before meeting with your contractor will save you time and promote better interaction. Remember you are the customer, get what you want!